Tc-helicon VoiceTone D1 Manual Instrukcja Użytkownika Pobierz pdf (Strona 7)

First Setup and Use

1.TurndownyourPA’smastervolume.

2.ConnectyourmicandPAasshowninthediagramfirst,thenplugintheACadaptor.Forlive

performance, a USB connection to a computer is not required.

3.SetthestyletoTightandthemixcontroltothecenternotch.

4.SingintoyourmicwhileadjustingtheMICGAINcontrolsothattheinputlevelLEDflashesgreen.

BriefflashesofredontheLEDonyourloudestsingingareok.

5.Ensurethattheeffectison(centerLEDislit).

6.SingwhileturningupyourPAvolumetoacomfortablelevel.

You can now sing while you sample the different doubling styles and raise and lower the mix. You’re

ready to perform! Note that When the effect is on, your dry voice is slightly delayed to align best with

the double voices and increase realism for your audience.

Phantom Power

ThereisnoswitchtoenablephantompowerontheVoiceTonesingles.Phantompowerisavailable

when the product is powered. Microphones that don’t require phantom power will operate properly.

AlwaysapplypowerasthelastconnectionstepandensureyourPAismuted.Thiswillreducethe

chance of audio pops that could harm your equipment.

1 2 3 4 5 6 7 8 9 10 11 12

Brak uwag

Tc-helicon VoiceTone D1 Manual Instrukcja Użytkownika Strona 7